Low Pressure Composite Repair (FurmaGlass)





Furmanite’s FurmaGlass is the ideal option for repair and strengthening of pipes where damage has gone through-wall.

The strength and stiffness of the glass fibre reinforcement make this ideally suited to lower pressure or smaller diameter lines. FurmaGlass is supplied in accordance with the requirements of ISO TS 24817 and ASME PCC-2 Article 4.1 and Type Approved by Lloyd’s Register (certificate reference 14/00009). Repairs can be applied to flat surfaces, tank walls, tank floors as well as pipes, tees, reducers, elbows and other components. The system can carry internal pressure and vacuum loads as well as axial loads, bending moments and shear loads.

FurmaGlass combines the proven performance of fibre glass reinforcement with the high bond strength and chemical resistance of epoxy resins to produce a system that can be used for the repair of pipes, even when damage has gone throughwall. Each repair is designed to ensure confidence can be placed in the performance of the system. The competence of installers is demonstrated through an externally-approved training course and tracking of experience of each technician.

The combination of hole size that can be sealed with the temperature and pressure of service is assessed in accordance with these guidance documents based on the wide range of validation testing completed. Ideal for local repairs, renovation of entire lines or even corrosion protection, FurmaGlass provides a cost-effective integrity management solution.

The FurmaGlass system utilizes a range of epoxy resins to address different service temperature requirements. The resin and fibre are combined on site meaning the system is very versatile in terms of geometries which can be repaired. The system can be used to provide strengthening and repair or to provide a robust corrosion protection layer in where paint coatings may be insufficient.

Furmanite - Innovative since 1920

Leak Sealing process developed leak-sealing-developed_thumb 01/01/1920

Furmanite Leak-Sealing process is Developed The under pressure Leak Sealing process is developed by Eugene Clay Furman at the Newport …

First DIY Leak-Sealing Kit old-furmanite-leak-sealing-equipment 01/01/1924

First DIY Leak-Sealing Kit The first do-it-yourself Leak Sealing kits were developed and marketed by Clay Furman and while they …

Long Standing Relationships Sales-Brochure-1926_thumb 01/01/1926

Long Standing Relationships US customer reference list that includes individual war ships in the US Navy, US steel companies and …

1st Patent is filed in 1927 furmanite-patents1 01/01/1927

1st Patent is filed in 1927 The Furmanite patent for the leak sealing process filed in 1927 was the first …

Furmanite moves Overseas Liverpool-Exibition_thumb 06/01/1927

Furmanite moves Overseas First overseas agents appointed to market the leak Sealing kits including in the United Kingdom and Euro…

Costs of a steam leak Sales-Brochure-1926-pg-8_thumb 06/01/1928

Price List from 1926 Table detailing costs of allowing a steam leak based on $4 per ton for “Long coal”. …

Furmanite is thinking global furmanite-the-skys-the-limit_thumb 01/01/1929

Furmanite is thinking global A brief history of the United Kingdom Company written by A W Forsyth (OBE) in September 1973 …

Technology Development leak-sealing-diagram 11/22/1934

Technology Development Furmanite Expands Engineering on Leak Sealing Technology. Photographs taken from a 1934 sales brochure together with schematics of …

Growing Furmanite purchase-letter_thumb 05/01/1960

Growing Furmanite Letter from the Chairman of Furmanite Engineering based in Birkenhead, England to his lawyer requesting information on a …

New Direction New-Technology_thumb 01/01/1966

New Direction Alan Forsyth, acting as a consultant to Furmanite Engineering (1929) advised the Board to move from selling low …

Never compromise on the high quality Company-History-July-1979_thumb 07/01/1979

Never to compromise on the high quality A brief history of the United Kingdom Furmanite organisation written by Joyce Hainsworth, the …

Best in the business were called NASA---Discovery-Team_thumb 09/01/1988

Best in the business were called Furmanite successfully seals nitrous oxide leakage on the Space Shuttle “Discovery” pre launch September …

Start of Modern Furmanite company-overview 11/22/1991

Start of Modern Furmanite The common shares of Furmanite were acquired by Kaneb Inc on 24th January 1991. Furmanite remains …

Acquisition-GSG Division Acquisition-GSG-Division_thumb 01/13/2006

Acquisition of Flow-Serve GSG Division Furmanite as part of Xanser Corporation acquired the General Services Group (GSG) of Flow-Serve corporation …

Corporate Name Change Corporate-Name-Change_thumb 01/13/2007

Corporate Name Change Xanser Corporation (NYSE:XNR) changed the company’s name to Furmanite Corporation, and the company’s shares were traded on …

Acquisition of SLM Acquisition-of-SLM_thumb 04/13/2011

Furmanite Corporation Acquires Self Leveling Machining Technology Furmanite expanded  its global on-site machining capabilities through the acquisition of Self Leveling …


Contact Us

  • Note: Forms may be submitted only once per webpage session.
  • This field is for validation purposes and should be left unchanged.